Rifle and Mount Information
Do I need an extra 12 Bore Quick-Release mount?
No, you only need one quick-release mount per ShotKam. The camera stays firmly attached inside the bottom of the mount, then the top of the mount opens like a claw to clamp onto your shotgun barrel. The mount does not stay attached onto the barrel, so you only need one 12 Bore Quick-Release mount per ShotKam.
Can I mount ShotKam to my rifle?
Yes, the ShotKam can be mounted onto rifles with our Rail Mount which works on any Picatinny or Weaver rail (shop here), or our barrel mounts. Please see our Help Center article for mounting recommendations and example videos: Guide to Attaching on Rifle
Do you have a mount for a 10 Bore or 16 Bore?
- 10 Bore: Yes, your 10 Bore shotgun will fit with our 12 Bore Quick-Release Mount, so you would not need an extra mount.
- 16 Bore: Yes, your 16 Bore shotgun will fit with our 12 Bore Quick-Release Mount, so you would not need an extra mount. Occasionally, the 16 Bore barrel may require adding an additional rubber pad. We include a free extra rubber pad in the "Spare Parts Bag" that comes with each purchase, so if needed, you would be able to use that pad to make the 12 Bore just slightly smaller.
Can the ShotKam be mounted onto a magazine tube?
Yes, your purchase will automatically come with a 12 Bore Quick-Release mount that will fit on most magazine extension tubes. The maximum diameter of the 12 Bore mount is 27 mm (a little over 1 inch) and this 12 Bore is our largest mount size. If your magazine tube is under 27mm in diameter, then you can mount the ShotKam onto it.
